{"product_id":"vintage-red-rubber-coated-steel-fishing-rod-rack-c-1955-1980","title":"Vintage Red Rubber-Coated Steel Fishing Rod Rack, c. 1955–1980","description":"\u003ch3\u003eThe Piece\u003c\/h3\u003e\n\u003cp\u003eA formed steel rack finished in thick red rubber. The base is a rectangular plate with one long edge turned down into a skirt, so it stands slightly proud of whatever it is set on. Two identical formed bars run across it in parallel, each rising into a pair of humps with a valley between them, and each is held down by two wing nuts on threaded studs passing through slotted feet. The slots let the bars slide, so the spacing between them sets to whatever is being held.\u003c\/p\u003e\n\u003cp\u003eThe finish is a dip coating rather than a spray. It is thick, evenly glossy, rounded over every edge and free of overspray, seams or brush marks, which is what happens when a steel part is lowered into the coating and drawn out. The colour is a saturated commercial red with nothing subtle about it.\u003c\/p\u003e\n\u003cp\u003eThe hardware is the opposite. Wing nuts, studs and washers are bare steel, uncoated and gone orange with rust, and the contrast between the four rusted wing nuts standing up out of a bright red field is most of what makes the object look the way it does.\u003c\/p\u003e\n\n\u003ch3\u003eHistory \u0026amp; Provenance\u003c\/h3\u003e\n\u003cp\u003eThe construction explains the purpose better than any label would. Steel is doing the structural work and the rubber is doing something else entirely: gripping, and protecting whatever is clamped against it. Anything passing under those arches is held between rubber above and rubber below, which is firm enough not to shift and soft enough not to mark. Nobody goes to the expense of dip-coating a bracket unless the thing it holds has a finish worth protecting.\u003c\/p\u003e\n\u003cp\u003eThat is why it reads as a rack for fishing rods and lines. A rod blank is finished, flexible and easily scuffed, and bare metal cradles would ruin one. The same logic explains the adjustable spacing, since rods vary in diameter along their length and the bars need to set to the section being carried.\u003c\/p\u003e\n\u003cp\u003eNothing on the piece names its maker or its purpose. There is no stamp, no model number, no patent line and no country of origin, and a dip coating would bury a stamped mark in any case. The function above is offered on the evidence of the form and the material rather than on documentation.\u003c\/p\u003e\n\u003cp\u003eThe dating rests on the coating. Dip-coating formed steel in rubber and vinyl is a postwar American process, in general use across consumer and sporting goods from the nineteen-fifties, and a part finished this way cannot predate it. Above that floor the piece carries no moulded plastic component, no printed or applied label and no origin marking, and those absences give a ceiling only. On that evidence it is offered as c. 1955 to 1980.\u003c\/p\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEra\u003c\/td\u003e\n\u003ctd\u003eVintage, offered as c. 1955 to 1980 on construction evidence\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eForm\u003c\/td\u003e\n\u003ctd\u003eTwo-bar rack with adjustable spacing; understood as a fishing rod and line rack, unmarked\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eFormed steel base and bars, dip-coated in rubber; bars mounted on slotted feet and clamped by wing nuts on threaded studs\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eSteel with a red rubber dip coating; bare steel hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMarks\u003c\/td\u003e\n\u003ctd\u003eNone present\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eApprox. 7 in. by 6 in. at the base; approx. 3 in. high to the top of the wing nuts\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003eSound and complete, all four wing nuts present and turning. Rubber coating intact, glossy and unsplit, with light marking. Rust throughout the exposed steel hardware. Offered as a decorative and collecting piece.\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003eOne, as shown\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhy It Belongs in Your Home\u003c\/h3\u003e\n\u003cp\u003eIt looks like a sculpture and it was not meant to. Two red waves rising off a red plate, with four rusted wing nuts standing up out of them like pins, is a composition nobody designed for looks, and that is exactly why it works on a shelf. The red is loud and the rust is quiet, and the two hold each other in balance.\u003c\/p\u003e\n\u003cp\u003ePut it on a bookshelf, a desk, a bar or a windowsill where the profile can be seen from the side, which is where it reads best. It still does its job, so it will hold rods, dowels, brushes, rolled paper or anything else you want gripped and not scratched.\u003c\/p\u003e","brand":"Viridian Eclection","offers":[{"title":"Default Title","offer_id":48073762242665,"sku":"VE-1652","price":215.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/0093\/9369\/files\/8C7E9393-1704-41BC-8205-729DD17B2902_4_5005_c.jpg?v=1789648530","url":"https:\/\/viridianeclection.com\/products\/vintage-red-rubber-coated-steel-fishing-rod-rack-c-1955-1980","provider":"Viridian Eclection","version":"1.0","type":"link"}